MPC3E-3D-NG-Q-R-B

oftware release

• Junos OS releases 14.1R4, 14.2R3 with Junos Continuity and Junos OS release 15.1 and later

• Refer to MIC/MPC Compatibility for information about which MICs are supported on this MPC.
• Refer to the JTAC Knowledgebase article https://kb.juniper.net/KB21476 for recommended software releases.

Description

• 130 Gbps capacity with hierarchical quality of service (HQoS)
• Requires high-capacity fan trays and high-capacity filter trays
• Weight: 15.96 lb (7.26 kg)
• Model number: MPC3E-3D-NG-Q
• Name in the CLI: MPC3E NG HQoS

Note: MPC3E-3D-NG-Q is not compatible with SCB, you must use either SCBE-MX or SCBE2-MX for the switch fabric interface.

Hardware features

• Line-rate throughput of up to 130 Gbps
• Supports up to 512,000 queues per slot
• Supports WAN-PHY mode at 9.95 Gbps and LAN-PHY mode at 10.31 Gbps
• Two slots for MICs
• Junos Trio chipsets for increased scaling for bandwidth, subscribers, and services

Software features

• Chained composite next hops
• Layer 3 VPN localization
• Detection of Layer 2 loops
• Entropy label support in mixed mode
• SNMP and CLI support for Routing Engine memory monitoring
• BFD support for inline MLPPP/MLFR
• Mixed Mode LAG support on core interfaces
• Dynamic power management for MICs
• See Protocols and Applications Supported by the MX240, MX480, MX960, MX2010, and MX2020 MPC3E for information about the protocols and applications that this MPC supports.

Power requirement

Maximum with highest-power MICs at 55° C: 12.15 A @ 48 V (583 W)

At different temperatures:

• 55° C: 583 W
• 40° C: 532 W
• 25° C: 503 W

LEDs

OK/FAIL LED, one bicolor:

• Steady green—MPC is functioning normally.
• Blinking green—MPC is transitioning online or offline.
• Red—MPC has failed.